Daiwa Infinity Landing Net

How well is it built?

The Daiwa Infinity Landing Net is a proper bit of kit and you can tell it's part of their premium Infinity range from the moment you pick it up. The ultra-light carbon construction is genuinely impressive – it's noticeably lighter than a lot of handles I've used before.

The slim profile carbon handle looks the business and matches perfectly with the Infinity rod range if you're running a coordinated setup. But more importantly, that lightweight construction makes a real difference when you're moving through the water quickly to net a fish.

The machined aluminium spreader block is a quality piece of engineering. The tolerances are tight which means the arms slide in and out smoothly without any fighting.

I've had plenty of nets over the years where you're wrestling to get the arms in or out – the Infinity's spreader block is genuinely user-friendly.

The EVA shrink grip feels good in the hand and provides excellent grip even when wet. It's the proper stuff that's heat-shrunk on rather than cheap rubber that'll peel off after a few well-used sessions.

Daiwa have finished the handle with their Infinity branding running along its length and there's a protective butt cap with the Daiwa logo. These little details might seem minor but they show attention to quality rather than just churning out generic tackle.

The two-piece design breaks down perfectly to fit inside rod holdalls like the Infinity System EXT which is brilliant for transport. No need for a separate net bag when you're loading up the motor.

Handle & Spreader

The handle on the Infinity is a classic slim profile design at 1.8m (6ft) which is spot on for most UK carp fishing situations. It's available as either a one-piece or two-piece model – I've been using the two-piece version and it's been ideal for my fishing.

One clever touch on the two-piece model is that the EVA grip extends past the joint between the sections. This might not sound like much but it makes a massive difference at the end of your session when you're trying to separate the sections.

You've got something substantial to grip onto rather than trying to twist apart smooth carbon – it's these little design details that show someone at Daiwa actually uses the gear.

The slim diameter handle is easy to manoeuvre and doesn't feel cumbersome when you're netting a fish. Some of the chunkier handles can feel a bit unwieldy but the Infinity feels balanced and controllable.

The machined aluminium spreader block deserves another mention because it really is that good. The arms click into place perfectly and there's zero play or wobbling once they're seated. After months of use, the tolerances are still tight with no signs of wear.

The 105cm arms (42-inch frame) create a good size opening that's large enough for typical UK carp without being so massive that you're fighting to move it through the water. It's the Goldilocks size – just right for most situations.

Mesh

The mesh on the Infinity is an 8mm olive green polyester that's properly fish-friendly. It's soft enough to protect the carp but durable enough that I haven't seen any signs of wear or tearing after regular use.

At 85cm deep, there's plenty of mesh depth for retaining fish safely. When you push the handle into the lakebed, there's still good depth below the surface for the carp to sit comfortably without their head poking out.

The 8mm weave is a good balance – fine enough to be gentle on the fish but open enough that water flows through easily when you're scooping. Some ultra-fine meshes create too much resistance which can make netting trickier.

The mesh features the Daiwa logo on the front which looks smart and ties in with the Infinity branding. It's a small detail but if you're running Infinity rods and other gear, it all coordinates nicely on the bank.

I've been using this net on some quite weedy venues and the mesh shakes clean reasonably well. It's not as snag-free as some of the more expensive options but for the price point, it performs well. The mesh attachments to the arms look solid with proper stitching.

These are the stress points where cheaper nets often fail first, but the Infinity's construction looks like it'll stand up to years of use.

Is it good value for money?

The Daiwa Infinity Landing Net sits in that sweet spot where you're getting premium features without the eye-watering price tag. It's the same price as the Fox Horizon X4S but slightly different in approach.

Daiwa have focused on a slim, lightweight design that matches modern rod aesthetics rather than going for thicker handles with maximum rigidity. It's a different philosophy but one that works really well.

For anglers who are already running Daiwa Infinity rods, this net is a no-brainer. The branding matches, the quality is consistent and the two-piece handle packs away in your rod holdall. It's a coordinated system that just makes sense.

But even if you're not a Daiwa user, the Infinity net offers excellent value. The machined aluminium spreader block, quality carbon construction and proper fish-friendly mesh would easily command a higher price from some other brands.

The fact that it's available as either one-piece or two-piece gives you options to match your fishing style and transport needs. That extended EVA grip on the two-piece version is worth the model choice alone if you've ever struggled with stuck net handle sections.

When you're comparing landing nets in this price bracket, our comprehensive guide to the best carp landing nets breaks down how models like the Infinity stack up against the competition to help you make the right choice.

Daiwa's reputation for quality and longevity means this net should give you years of reliable service. It's hard to find fault with what you're getting for your money.